Dental Prosthesis Technology carries out the procedures such as preparing orthodontic applications applied to the jaw and face area, and preparing removable/fixed prostheses by obtaining models on plaster silicone measurements, procedures to make the prosthesis suitable for use in the mouth by means of casting methods, in accordance with the treatment method planned by the dentist, using hand tools on the measured model obtained from the patient, adhering to the rules required by the professional knowledge.
Dental Prosthesis Laboratory consist of 1 main laboratory and 3 separate units.
In Main Laboratory, procedures such as producing orthodontic appliance, smoothing, modelling, ring process are conducted.
In Plaster Room, procedures such as the first step of prosthesis which is modelling (Zieser, pindex, etc.) and investment ring are conducted.
In Acrylic Room, procedures such as polishing, water sandblast, muffle/boil the total and partial prostheses, denture base, model duplication are conducted.
In Casting Room, procedures such as metal casting, resining, pen sanding, preheating of the models with investment ring are conducted.
Dental Prosthesis Techniques Department Head
444 1 428 - 56300
General Information | Hood disperses the chemical fumes occurring in acrylic prosthesis procedures by ventilation and provides a healthier work environment. |
Brand & Model | ER METAL / AKR-2500 |
Technical Details |
General Information | It is used for carefully detaching the revetment from the metal surface. |
Brand & Model | RENFERT / POWER PİLLO |
Technical Details | Maximum health protection by reducing the vibration levels reaching the joints Nominal operating pressure: 5 bar / 72 psi |
General Information | Geçici plastik kronların,geçici protez kırıklarının tamir ve onarım işlemlerinin yapılmasını amaçlar. |
Brand & Model | İvomak / Biodent |
Technical Details | Boiler Dimensions: 110x90 mm Dimensions: 30x30x17 mm Weight: 10 kg Power Consumption: 1500W 10A (max) |
General Information | It is used for melting the duplicate material, and preserving it in the same temperature. |
Brand & Model | BEGO / GELOVIT 200 |
Technical Details | Voltage: 230 V 50 – 60 Hz Power: 900 W |
General Information | It is used for polymerizing and hardening the base plate material with rays. |
Brand & Model | KUZEY DİŞ DEPOSU |
Technical Details | 4*9 watt 36 watt total ray power |
General Information | It is used for preventing the particles from spreading around and to our face during metal and prosthesis leveling procedures, thus, establishes a safe work environment |
Brand & Model | ER METAL |
Technical Details | Dimesion: 64 x 86 x 126 cm (h) 2 x 18 W Waterproof Fluorescent Light |
General Information | This heater automatically cleans the prostheses placed in a muffle by hot water. |
Brand & Model | ER METAL / C-10 |
Technical Details | Woltage:220/230 V 50-60 Hz Power: 3000W Dimension: 62 x 65 x 93 cm (h) Cr/Ni Anti-rust Resistance System A304 Cr/Ni Stainless Steel Construction 3000 W Cr/Ni Anti-rust Resistance System Automatic Water Intake and Drain System |
General Information | Polymerization device provides the heat required for the polymerization of acrylic material applied to jaw models placed on muffle. |
Brand & Model | ER METAL / C-11 |
Technical Details | Dimension: 50 x 51 x 52 cm (h) Voltage: 220/230 V 50-60 Hz Power: 2500 W A304 Cr/Ni Stainless Steel Construction |
General Information | It is used for polishing total prostheses and skeletal metal surfaces. |
Brand & Model | ER METAL / E-44 |
Technical Details | Dimesion: 55 x 78 x 55 cm (h) Voltage: 220*230 V 50 Hz Power: 860 W Two level polishing motor with 1400 and 2800 cycles, and compatible with two brush usage. |
General Information | It is used for preparing the metal casts released from revetments to levelling after the casting process. |
Brand & Model | SUJET |
Technical Details | - |
General Information | It is used for shaping the cast models to the desired forms. |
Brand & Model | ZHERMACK / C305905 SQM 25 N |
Technical Details | Voltage: 230 V 50/60 Hz Power: 600W Speed: 2800 min Abrasive disc
|
General Information | Steam cleaner overall cleans the teeth and jaw models by pressured steam. |
Brand & Model | ZHERMACK / C305201 VAP 6 |
Technical Details | Dimensions: L29 cm /W46 cm/ H42 cm Maximum 10 bar output capacity |
General Information | It is used for obtaining die by parallelly cutting between the model teeth. |
Brand & Model | ZHERMACK / C306900 TALETE |
Technical Details | Voltage: 230 V 50/60 Hz Power: 200W suction flow : 209 m³ / saat Suction Power: 200 W Speed: 600 rpm |
General Information | It is used for precisely scaling the used materials. |
Brand & Model | METALTEX INTERNATİONAL |
Technical Details | Measures up to 5 kilograms. |
General Information | This equipment presses the prostheses which are in muffle by pressure. |
Brand & Model | ER METAL / CARLO DE GIORGI |
Technical Details | Çalışma Basıncı: 200 bar |
General Information | It is used for quicken the wax modelling procedures by continuously keeping the scoop at the desired temperature. |
Brand & Model | TEKNİK DENTAL |
Technical Details | Max. Power: 16 Vat |
General Information | It is used for preserving the wax at desired temperature in order for wax to be ready to use in modelling processes. |
Brand & Model | RENFERT / WAXPROFİ-14400000 |
Technical Details | Voltage: 220-240 V f:50/60 Hz 40-110 ºC 104-230 ºF |
General Information | Pindex machine opens the entry ways of pins by milling which will be located in the underside of cast when obtaining a pinned model. |
Brand & Model | RENFERT / TOP SPİN PİNDEX |
Technical Details | Voltage: 100-240 V 50/60 Hz Power: 12 W (during drilling) Power: 0,7 W (During Standby) Rotational speed: 8000 1/minute Dimesion: 153 x 330 x 175 mm / 6,0 x 13,0 x 6,9 Allowed Drill Rod Diameter: 3 mm (± 0,03 mm) Allowed Drill L: 34–46 mm 1,34–1,81 " |
General Information | It is used for trimming the excessive parts of the casts. |
Brand & Model | RENFERT / MİLLO |
Technical Details | Voltage: 230 V (50 Hz) / 120 V (60 Hz) Speed: 2770 (50 Hz) / 3350 (60 Hz) Weight: 5.7 kg Dimesion: 252 x 214 x 207 mm (9.92 x 8.43 x 8.15 inç) |
General Information | Vacuum mixer is used for mixing the materials such as cast or revetments without any bubbles under vacuum. |
Brand & Model | ZHERMACK / C305120 ELİTE MİX |
Technical Details | 230 V /50 Hz 150W |
General Information | |
Brand & Model | |
Technical Details |
General Information | Pindex machine opens the entry ways of pins by milling which will be located in the underside of cast when obtaining a pinned model. |
Brand & Model | DİVARİO |
Technical Details | Adjustable mill height Full automatic Compatible with all systems Accurate placement of pins |
General Information | Micro motor is used in operations such as smoothing, leveling and repairing in dental prosthesis. |
Brand & Model | Marathon / Multi 600 |
Technical Details | Maximum Speed: 40.000 rpm Hand Piece Torque: 8.5 Ncm Voltage: 220 V |
General Information | Parallometer determines the entrance ways for latch bridge, and opens the milling canals. |
Brand & Model | ROTAKS DENT |
Technical Details | Dimensions: 320 x 140 x 200 mm |
General Information | It is used for preparing transparent plaques for jaw measurements. |
Brand & Model | 3A MEDES / EV02 |
Technical Details | Voltage: 220-240 V 50/60 Hz Power: 2 kW |
General Information | It is used for sintering the porcelain teeth by baking them in the oven. |
Brand & Model | ARTİS UGİN |
Technical Details | Volt: 230 V ~ 50/60 Hz 270W |
General Information | It is used for casting by melting the metal compounds. |
Brand & Model | UGİN –DUCATRON / SERİE 3 |
Technical Details | Voltage: 230 V 50 Hz Power: 2500 W |
General Information | This pen is used for removing the oxide layer on the surface of metal compounds, and clean the surface of the material by removing the casting revetment. |
Brand & Model | ZHERMACK |
Technical Details | Running Time: 1-8 bar(14.5-116 psi) External connection pressure: 5-8 bar (72-116 psi) Air consumption at 6 bar (87 psi) : 98 l/min Weight: 6.5 kg |
General Information | This equipment aims to eliminate wax on the cast-ringed models by high temperature. |
Brand & Model | MİKROTEK / MFX- ECO MODEL |
Technical Details | MFX Oven Features Width: 49 cm Height: 33 cm Depth: 52 cm Voltage: 220 V 50 Hz Flow: 9A Power: 2000 W Weight: 20 kg
Heating Reservoir Features Width: 13 cm Height: 13 cm Depth: 22 cm Capacity : 3.7 lt Max. Heat: 11000 Warm up time: 45 dk |
*
Laboratuvar | Cihaz Adı | Test Adı/Tedavi Parametreleri/Yapılan Uygulamalar |
---|---|---|
In Plaster Room, In Acrylic Room, In Casting Room | Cast Cutting Machine, Trimmer, Hydraulic Press, Wax Heater, Polymerization Device, , Polishing, Micromotor | Full Prosthesis (Acrylic - Single Jaw) |
In Plaster Room, In Acrylic Room, In Casting Room | Cast Cutting Machine, Trimmer, Hydraulic Press, Wax Heater, Polymerization Device, , Polishing, Micromotor | Partial Prosthesis (Acrylic - Single Jaw) |
In Plaster Room, In Acrylic Room, In Casting Room | Cast Cutting Machine, Trimmer, Hydraulic Press, Wax Heater, Polymerization Device, , Polishing, Micromotor , Preheat Oven, Induction Casting Oven, Vacuum Mixer, Water blaster, Sanding Pen, | Full Prosthesis (Metal Cast Enhanced - Single Jaw) |
In Plaster Room, In Acrylic Room, In Casting Room | Cast Cutting Machine, Trimmer, Hydraulic Press, Wax Heater, Polymerization Device, , Polishing, Micromotor , Preheat Oven, Induction Casting Oven, Vacuum Mixer, Water blaster, Sanding Pen, | Partial Prosthesis (Metal Cast Enhanced - Single Jaw) 2021 |
Dental Prosthesis Technology Laboratory, In Plaster Room, In Acrylic Room, In Casting Room | Parallelometer Cast Cutting Machine, Trimmer, Hydraulic Press, Wax Heater, Polymerization Device, , Polishing, Micromotor , Preheat Oven, Induction Casting Oven, Vacuum Mixer, Water blaster, Sanding Pen, | Precision Attachment Prosthesis (Excluding Precise Attachment Price - Single Jaw) |
In Plaster Room, In Acrylic Room, In Casting Room | Cast Cutting Machine, Trimmer, Hydraulic Press, Wax Heater, Polymerization Device, , Polishing, Micromotor | Implant Supported Removable Prosthesis (Excluding Precise Attachment Price - Single Jaw) |
Dental Prosthesis Technology Laboratory | Model Trimmer, Trimmer Micro motor | Temporary (Immediate) Prosthesis (Acrylic - Single Jaw) |
In Acrylic Room | Hydraulic Press, Wax Heater, Polymerization Device, , Polishing | Relining (Single Jaw) |
In Acrylic Room | Hydraulic Press, Wax Heater, Polymerization Device, , Polishing | Renewal (Rebase - Single Jaw) |
In Acrylic Room | Micromotor, Pressure Boiler, Trimmer,Cast Cutting Machine | Repair (Acrylic Prosthesis, Chip or Break) |
In Acrylic Room | Micromotor, Pressure Boiler, Trimmer,Cast Cutting Machine | Extra Hook |
In Acrylic Room | Micromotor, Pressure Boiler, Trimmer,Cast Cutting Machine | Extra Tooth (Single Tooth) |
In Plaster Room, In Acrylic Room, In Casting Room | Parallelometer Cast Cutting Machine, Trimmer, Hydraulic Press, Wax Heater, Polymerization Device, , Polishing, Micromotor , Preheat Oven, Induction Casting Oven, Vacuum Mixer, Water blaster, Sanding Pen, | Roach Bridge |
In Acrylic Room | Micromotor, Pressure Boiler, | Soft Acrylic Application on Prosthesis (Temporary Single Jaw) |
In Acrylic Room | Hydraulic Press, Wax Heater, Polymerization Device, Polishing ,Micromotor, Pressure Boiler, Trimmer,Cast Cutting Machine | Soft Acrylic Application on Prosthesis (Fixed Single Jaw) |
In Acrylic Room | Hydraulic Press, Wax Heater, Polymerization Device, Polishing ,Micromotor, Pressure Boiler, Trimmer,Cast Cutting Machine | Cleft Palate Prosthesis (Velum Apparatus) |
Dental Prosthesis Technology Laboratory | Micromotor | Veneer Crown (Acrylic) |
Dental Prosthesis Technology Laboratory, In Plaster Room, In Acrylic Room, In Casting Room | Modelling Wax Heating Pen, Vacuum Mixer, Preheat Oven,Induction Casting Oven, Power Pillo, Water blaster,Sanding Pen, Porcelain Oven, Micromotor, Trimmer, Cast Cutting Machine | Veneer Crown (Ceramic) |
Dental Prosthesis Technology Laboratory, In Plaster Room, In Acrylic Room, In Casting Room | Modelling Wax Heating Pen, Vacuum Mixer, Preheat Oven,Induction Casting Oven, Power Pillo, Water blaster,Sanding Pen, Porcelain Oven, Micromotor, Trimmer, Cast Cutting Machine | One Piece Cast Crown |
Dental Prosthesis Technology Laboratory, In Plaster Room, In Acrylic Room, In Casting Room | Modelling Wax Heating Pen, Vacuum Mixer, Preheat Oven,Induction Casting Oven, Power Pillo, Water blaster,Sanding Pen, Porcelain Oven, Micromotor, Trimmer, Cast Cutting Machine | Veneer Crown on Implant (Ceramic) (Excluding Abutment Price) |
In Plaster Room, In Acrylic Room | Micromotor, Pressure Boiler, Trimmer,Cast Cutting Machine | Jacket Crown (Acrylic) |
Dental Prosthesis Technology Laboratory | Parallelometer | Difference for Mill Technique on Crowns |
Dental Prosthesis Technology Laboratory, In Plaster Room | Micromotor, Trimmer,Cast Cutting Machine | Temporary Crown (Single Tooth) |
Dental Prosthesis Technology Laboratory, In Plaster Room, In Acrylic Room, In Casting Room | Preheat Oven,Induction Casting Oven, Power Pillo, Water blaster,Sanding Pen, Porcelain Oven, Micromotor, Trimmer, Cast Cutting Machine | Crown Bridge Repair (For every member) |
Dental Prosthesis Technology Laboratory, In Plaster Room | Plaque Pressure, Micromotor, Trimmer,Cast Cutting Machine | Night Guard (Soft) |
Dental Prosthesis Technology Laboratory, In Plaster Room | Plaque Pressure, Micromotor, Trimmer,Cast Cutting Machine | Night Guard (Soft Occlusal Splint) |
Dental Prosthesis Technology Laboratory, In Plaster Room,In Acrylic Room | Micromotor, Pressure Boiler, Trimmer,Cast Cutting Machine | Orthodontic Model |
In Plaster Room, In Acrylic Room | Micromotor, Pressure Boiler, Trimmer,Cast Cutting Machine | Apparatus repair |
Dental Prosthesis Technology Laboratory, In Plaster Room, In Acrylic Room, | Micromotor, Pressure Boiler, Trimmer,Cast Cutting Machine | Remaking Lost Apparatus (Single Jaw) |
In Plaster Room, In Acrylic Room | Micromotor, Pressure Boiler, Trimmer,Cast Cutting Machine | Lingual Arc |
In Plaster Room, In Acrylic Room | Micromotor, Pressure Boiler, Trimmer,Cast Cutting Machine | Nance Apparatus |
Dental Prosthesis Technology Laboratory, In Plaster Room | Plaque Pressure, Micromotor, Trimmer,Cast Cutting Machine | T.M.E. Splint Making |