Orthopedic Prosthesis and Orthosis Laboratory

Orthopedic Prosthesis and Orthosis Laboratory is equipped with the equipment, device and consumables which will used in the design, construction, implementation and repair of the tools in which help facilitating the daily activities of individuals who have lost their organs in the locomotor system for various reasons, fulfill the function of the lost organ, even partially, support and protect the organ that has lost its function.


Orthopedic Prosthesis and Orthosis Laboratory practices contribute to the development of student’s skills and opportunity to gain the ability of apply what they have learned about orthoses and prostheses applied to patients under the supervision of specialist physicians in the field.


Orthopedic Prosthesis and Orthosis laboratory consist of three different units. 


In Application Laboratory; Installation and adjustment processes in which the design, metal and plastic processing take place are conducted.


In Cast Laboratory; Negative and positive cast models are prepared.

In Machine Laboratory; Puncture, processing and surface cleaning for metal and plastic materials are conducted.

Administrative Staff

Vice Rector

Prof. Dr. Ahmet İLVAN

[email protected]

444 1 428 - 56102

Laboratories Coordinator

Öğr. Gör. Veli Bülent UÇAR

[email protected]

444 1 428 - 14628

Academic Staff

Orthopedic Prosthesis and Orthosis Department Head


[email protected]

444 1 428 - 56802



[email protected]

444 1 428 - -



[email protected]

444 1 428 - -



[email protected]

444 1 428 - -

In Application Laboratory

Sewing Machine

General Information It is used for the assembly of the materials such as fabric and leather
Brand & Model Brother
Technical Details

220 v


General Information It is used for drying casts and heating the plastics.
Brand & Model Binder
Technical Details

Nominal Voltage (±10 %)
50/60 Hz (V)    :    230 / 208
Nominal Power (W)    :    2700
Energy Consumption (150 °C) G: 447


Plaque Oven

General Information It is used for heating the plastic materials.
Brand & Model -
Technical Details

Power source: 220 V / 50 Hz 721 Amp
Total capacity: 4,6 kW
Weight: 110 Kg


Water bath

General Information It is used for heating the low-hear thermoplastics.
Brand & Model Orbit
Technical Details

220 V

In Cast Laboratory

In Cast Laboratory

General Information -
Brand & Model -
Technical Details


In Machine Laboratory

Pillar Drill

General Information It is used for drilling on the materials.
Brand & Model Quantum / Pillar Drill
Technical Details

Motor Power: 550 W
230 V Drill Capacity: 20mm
Spindle Motion: 80 mm
Spindle Taper: MK 2 
Speed: 210 - 2220 cycle/min. 
Level: 12
Plaque Dimensions: 275 x 275 mm 
Max. distance between spindle and plaque: 465 mm 
Pillar diameter: Ø 70 mm
Max. distance between spindle and pillar: 170 mm 
Base dimensions: 205 x 200 mm
Max. distance between spindle and base: 645 mm 
Dimensions (LxWxH) : 700x300x990mm 

Grinding Equipment

General Information It is used for corroding metals.
Brand & Model Gürmaksan
Technical Details

Type: Grinding Equipment

Input power: 350 W

Output power: 200 W

Input voltage: 220 - 240 V / 50 - 60 HZ

Idle cycle: 2.980 cycle-minute

Torque: 1.1 NM

Dedusting Motor

General Information It is used for suctioning the dust and shavings formed during the milling procedure.
Brand & Model Gamak
Technical Details

Voltage: 230-240V/550W
Capacity: 75 liter
Air flow: 650 m3/s
Hose: 100mm
Suction hose: 100x1500mm
Sound level: 85 dB
Weight: 25 kg


General Information It is used for vacuuming during the lamination and deep focus.
Brand & Model -
Technical Details

220 v

Sanding Machine

General Information It is used for smoothing the roughness on surfaces to create a leveled surface.
Brand & Model Otto Bock
Technical Details

380 V  , 2,2 KW , 50 Hz

Rezervasyon Takvimi

Makale Başlığı

02.02.2020 Detaylar


LaboratuvarCihaz AdıTest Adı/Tedavi Parametreleri/Yapılan Uygulamalar
In Machine LaboratorySanding MachineProsthesis orthosis manufacturing
In Machine LaboratoryFrezeProsthesis orthosis manufacturing
In Machine LaboratoryPillar DrillProsthesis orthosis manufacturing
In Machine LaboratoryGrinding EquipmentProsthesis orthosis manufacturing
In Machine LaboratoryDedusting MotorProsthesis orthosis manufacturing
In Application LaboratorySewing MachineProsthesis orthosis manufacturing
In Application Laboratory OvenProsthesis orthosis manufacturing
Istanbul Aydin University Halit Aydın Kampüsü No:38 , Sefaköy–Küçükçekmece, Istanbul, 34295 Tel: 444 1 428

Follow us!